mara
*new*
16.05.2009 10:04:24 ( 28274 )
Router>enable
Router#conf t
Router(config)#hostname RA
RA(config)#exi
RA#debug ip routing
RA#conf t
RA(config)#li
RA(config)#line co
RA(config)#line console 0
RA(config-line)#password cisco
RA(config-line)#logi
RA(config-line)#login
RA(config-line)#lo
RA(config-line)#logg
RA(config-line)#logging sy
RA(config-line)#logging synchronous
RA(config-line)#exi
RA(config)#no ip do
RA(config)#no ip domain-lookup
RA(config)#ena
RA(config)#enable se
RA(config)#enable secret cisco
RA(config)#line
RA(config)#line v
RA(config)#line vty 0 3
RA(config-line)#pa
RA(config-line)#pas
RA(config-line)#password cisco
RA(config-line)#log
RA(config-line)#login
RA(config-line)#exi
RA(config)#int
RA(config)#interface lo
RA(config)#interface loopback 0
%LINK-5-CHANGED: Interface Loopback0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
RA(config-if)#
RA(config-if)#ip add
RA(config-if)#ip address 10.0.0.112 255.255.255.252
Bad mask /30 for address 10.0.0.112
RA(config-if)#ip address 10.0.0.113 255.255.255.252
RT: interface Loopback0 removed from routing table
RT: interface Loopback0 added to routing tableRT: SET_LAST_RDB for 10.0.0.112/30
NEW rdb: is directly connected
RT: add 10.0.0.112/30 via 0.0.0.0, connected metric [0/0]
RT: NET-RED 10.0.0.112/30
RT: interface Loopback0 added to routing table
RA(config-if)#
RA(config-if)#no sh
RA(config-if)#no shutdown
RA(config-if)#
RA(config-if)#
RA(config-if)#exi
RA(config)#in
RA(config)#interface se
RA(config)#interface serial 2/0
RA(config-if)#ip address 10.0.0.121 255.255.255.252
RA(config-if)#no shu
RA(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
RA(config-if)#clo
RA(config-if)#clock ra
RA(config-if)#clock rate 19200
RA(config-if)#ban
RA(config-if)#bandwidth 256
RA(config-if)#exi
RA(config)#in
RA(config)#interface swe
RA(config)#interface se
RA(config)#interface serial 3/0
RA(config-if)#ip add
RA(config-if)#ip address 10.0.0.117 255.255.255.252
RA(config-if)#clo
RA(config-if)#clock ra
RA(config-if)#clock rate 19200
RA(config-if)#ba
RA(config-if)#bandwidth 64
RA(config-if)#no shu
RA(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial3/0, changed state to down
RA(config-if)#exi
RA(config)#in
RA(config)#interface f
RA(config)#interface fastEthernet 0/0
RA(config-if)#ip add
RA(config-if)#ip address 10.0.0.1 255.255.255.192
RA(config-if)#pa
RA(config-if)#pass
RA(config-if)#no shu
RA(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
RT: interface FastEthernet0/0 added to routing tableRT: SET_LAST_RDB for 10.0.0.0/26
NEW rdb: is directly connected
RT: add 10.0.0.0/26 via 0.0.0.0, connected metric [0/0]
RT: NET-RED 10.0.0.0/26
RA(config-if)#
RA(config-if)#exi
RA(config)#ba
RA(config)#banner m
RA(config)#banner motd ' bubububu '
RA(config)#
RA(config)#
RA(config)#
RA(config)#
RA(config)#rou
RA(config)#router o
RA(config)#router ospf 1
RA(config-router)#ne
RA(config-router)#network 10.0.0.120 0.0.0.3 a
RA(config-router)#network 10.0.0.120 0.0.0.3 area 0
RA(config-router)#network 10.0.0.116 0.0.0.3 area 0
RA(config-router)#network 10.0.0.0 0.0.0.63 area 0
RA(config-router)#network 10.0.0.112 0.0.0.3 area 0
RA(config-router)#exi
RA(config)#ip rou
RA(config)#ip route 0.0.0.0 0.0.0.0 lo
RA(config)#ip route 0.0.0.0 0.0.0.0 loopback 0
RT: SET_LAST_RDB for 0.0.0.0/0
NEW rdb: is directly connected
RT: add 0.0.0.0/0 via 0.0.0.0, static metric [1/0]
RT: NET-RED 0.0.0.0/0RA(config)#
RA(config)#pro
RA(config)#ip re
RA(config)#ip re
RA(config)#rou
RA(config)#router o
RA(config)#router ospf 1
RA(config-router)#de
RA(config-router)#default-information o
RA(config-router)#default-information originate
RA(config-router)#